UTravis82
< 25 Posts
Ok, so I'm about to make my own Inside Approach. $80 is just a little too steep for me considering that I can make one for $5 in PVC pipe. I was hoping that you could help a fellow Horn in getting the dimensions close to the real thing. Here's what I've got thus far:
4 - 12 inch pvc pipes (2 for legs which will remain 12 inches, 1 for a vertical stand which will be 8 inches, 1 for a 6 inch bar to extend toward the ball, and a piece of pipe to be apart of the foam connection.)
1 y-joint (for the legs)
2 elbow joints (1 for the vertical bar and 1for the foam connection)
1 piece of foam
Some gravel to weigh down the legs
The thing will stand 8 inches off the ground and the foam bar will go out 18 inches.
If you see me going in the wrong direction please let me know. If you know the exact dimensions of the Inside Approach, your info would be GREATLY appreciated!
4 - 12 inch pvc pipes (2 for legs which will remain 12 inches, 1 for a vertical stand which will be 8 inches, 1 for a 6 inch bar to extend toward the ball, and a piece of pipe to be apart of the foam connection.)
1 y-joint (for the legs)
2 elbow joints (1 for the vertical bar and 1for the foam connection)
1 piece of foam
Some gravel to weigh down the legs
The thing will stand 8 inches off the ground and the foam bar will go out 18 inches.
If you see me going in the wrong direction please let me know. If you know the exact dimensions of the Inside Approach, your info would be GREATLY appreciated!
